FUNCTIONS | NAMES AND |
CONNECTIONS | BASIC |
OPERATION | BASIC |
CONNECTIONS | ADVANCED |
SETUP | |
OPERATION | ADVANCED |
TROUBLESHOOTING | |
ENGLISH
BEFORE USE
REMOTE CONTROL
Operate the remote controller within a distance of approx. 16.4 ft from the infrared receptor window on the front of the unit.
Approx. 5m (16.4 ft)
Remote controller
Caution
•Do not allow direct sunlight, an inverter fluorescent light or other strong source of light to shine onto the playerʼs infrared receptor window. Otherwise, the operation of the remote controller may be disabled.
•Bear in mind that operating the remote controller may cause other devices operated by infrared rays to be operated by mistake.
•The remote controller cannot be operated if the space between the controller and the playerʼs infrared receptor window is obstructed.
•Do not place any objects on top of the remote controller.
Doing so may cause one or more buttons to be held down which will cause the batteries to run down.
NAMES AND FUNCTION
FRONT PANEL
SR6004qw | ertyu i o !0!1!2!3!4!5 !6 |
@2@1@0 !9 !8 !7
SR5004qw | ertyu i o !0!1!2!3!4!5 !6 |
qPOWER switch and STANDBY indicator
When this switch is pressed once, the unit turns ON and the display illuminates. When pressed again, the unit turns OFF and the STANDBY indicator will be illuminated.
wINPUT SELECTOR knob
This knob is used to select the input sources. (See page 16)
eSURR. MODE button
Press this button to select the surround mode.
rDYNAMIC VOL. indicator
This indicator illuminates while the Audyssey Dynamic VolumeTM is in use.
tDYNAMIC EQ. indicator
This indicator illuminates while the Audyssey Dynamic EQTM is in use.
yAUTO button
Press this button to select the AUTO mode from the surround modes. When this mode is selected, the unit determines the surround mode corresponding to a digital input signal automatically.
uPURE DIRECT button
Press this button to select the pure direct mode or source direct mode.
iDISPLAY button
Press this button to change the FL display mode.
OTHERS |
@2@1 !9 !8 !7
4
