2-2 MANUAL SETUP
1. Select “Speaker Setup” from the Main Menu.
2. Select “Manual Setup” with the 3 or 4 cursor buttons.
3. Press the ENTER button to enter the selection.
Manual Setup
Speakers Size
Speakers Distance
Speakers Level
Return
: Up / Down | : | Enter : Select Exit : Exit |
4. Select the
<SPEAKERS SIZE>
5. Select Speaker Size with the 3 or 4 cursor button from the Manual Setup menu, and press the ENTER button.
Speakers Size |
|
|
|
Subwoofer |
| : Yes |
|
Front |
| : Small |
|
Front Height |
| : Small |
|
Center |
| : Small |
|
Surround |
| : Small |
|
Surround Back |
| : 2ch |
|
Surround Back Size | : Small |
| |
LPF / HPF |
| : 80Hz |
|
Bass Mix |
| : * * * |
|
Return |
|
|
|
: Up / Down | : Change | Enter : | Exit : Exit |
When setting the speaker size in the Speaker Size menu, use the guidelines below.
Large:
The complete frequency range for the channel you are setting will be output from the speaker.
Small:
Frequencies of the channel you are setting that are lower than approx. 80 Hz will be output from the subwoofer.
If the Subwoofer is set to “No” and the front speakers are set to “Large”, then the sound will be output from both the left and right speakers.
Subwoofer
Yes:
Select when a subwoofer is connected.
No:
Select when a subwoofer is not connected.
Front
Large:
Select if the front speakers are large.
Small:
Select if the front speakers are small.
Note
•If “No” is selected for the subwoofer setting, then this setting is fixed at “Large.”
Front Height
None:
Select if no front height speaker is connected.
Large:
Select if the front height speaker is large.
Small:
Select if the front height speaker is small.
Note
•If “Zone SPKR” is selected for Surround Back speakers, then this setting is fixed to “None”.
Center
None:
Select if no center speaker is connected.
Large:
Select if the center speaker is large.
Small:
Select if the center speaker is small.
Surround
None:
Select if no surround speakers are connected.
Large:
Select if the surround speakers are large.
Small:
Select if the surround speakers are small.
Surround Back
None:
Select if no surround back speakers are connected.
1ch:
Select if one surround back speaker is connected. In this case, the audio signal is emitted from the SURR BACK LEFT SPEAKER terminal.
2ch:
Select if the surround back left and right speakers are connected.
Zone SPKR:
Select if using the SURROUND BACK SPEAKER terminal as ZONE SPEAKER A.
Note
•If “None” is selected for the Surround setting, then this setting is fixed to “None.”
Surround Back Size
Large:
Select if the surround back speakers are large.
Small:
Select if the surround back speakers are small.
Note
•If “None” is selected for the Surround setting, then this setting is not available.
ENGLISH
SETUP
LPF/HPF
When you use a subwoofer, you can select the cutoff frequency for the small speakers used. Select one of the crossover frequency levels according to the size of the small speakers connected.
40Hz → 60Hz → 80Hz → 100Hz → 120Hz → 140Hz
→160Hz → 180Hz
Note
•If using small front speakers, set a slightly higher frequency. If using large front speakers, set a slightly lower frequency.
Bass Mix
•The bass mix setting is only valid when “Large” is set for the front speakers and “Yes” is set for the subwoofer during stereo playback.
This setting has effect only during playback of PCM or analog stereo sources.
•When “Both” is selected, the low frequencies will be played through the main L&R speakers and the subwoofer.
In this playback mode, the low frequency range expands more uniformly throughout the room, but depending on the size and shape of the room, interference may result in a decrease of the actual volume of the low frequency range.
•By selecting “Mix”, the low frequencies will play through the main L&R only.
Note
•LFE signals during playback of Dolby Digital or DTS will be played through the subwoofer.
6. Select each speaker with the 3 or 4 cursor buttons.
7. Set the size of each speaker with the 1 or 2 cursor buttons.
8. After you complete this portion of the setup, move the cursor to “Return” with the 3 or 4 cursor buttons and press the ENTER button to display the Manual Setup screen.
NAMES AND | FUNCTIONS |
BASIC | CONNECTIONS |
BASIC | OPERATION |
ADVANCED | CONNECTIONS |
SETUP | |
ADVANCED | OPERATION |
TROUBLESHOOTING | |
OTHERS | |
31
