Important Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE

PARTS INSIDE REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL

The lightning ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

READ BEFORE OPERATING EQUIPMENT

This product was designed and manufactured to meet strict quality and safety standards.

There are, however, some installation and operation precautions which you should be particularly aware of.

1.	Read these instructions.
2.	Keep these instructions.
3.	Heed all warnings.
4.	Follow all instructions.
5.	Do not use this apparatus near water.
6.	Clean only with dry cloth.
7.	Do not block any ventilation openings. Install in accordance with the manufacture's instructions.
8.	Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
	(including ampliﬁers) that produce heat.
9.	Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
	blades with one wider than the other. A grounding type plug has two blades and a third grounding
	prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁt
	into your outlet, consult an electrician for replacement of the obsolete outlet.
10.	Protect the power cord from being walked on or pinched particularly at plugs, convenience
	receptacles, and the point where they exit from the apparatus.
11.	Only use attachments/accessories speciﬁed by the manufacturer.
12.	Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the
	apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
	injury from tip-over.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE:

Changes or modiﬁcations may cause this unit to fail to comply with Part 15 of the FCC Rules and may void the user's authority to operate the equipment.

13.	Unplug this apparatus during lightning storms or when unused for long periods of time.
14.	Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been
	damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
	objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
	operate normally, or has been dropped.

Additional Safety Information!

•	This product should not be placed in a built-in installation such as a bookcase or rack unless proper
	ventilation is provided or the manufacturer’s instructions have been adhered to.
•	Apparatus shall not be exposed to dripping or splashing and that no objects ﬁlled with liquids, such as
	vases, shall be placed on the apparatus.
• When the switch is in the OFF position, the apparatus isn’t completely switched-off from the MAINS.
• The equipment shall be installed near the power supply so that the power supply is easily accessible.

This Class B digital apparatus complies with	Cet appareil numerique de la Classe B est conforme
Canadian ICES-003.	a la norme NMB-003 du Canada.

• Do not expose the unit to excessive heat such as direct sunlight, ﬁre or the like.

AMPRC_090130U2

SR6004, SR5004 specifications

The Marantz SR5004 and SR6004 are distinguished models in the world of home theater receivers, offering a perfect blend of high-quality audio performance and advanced technology. Both of these receivers are designed to cater to audiophiles and home theater enthusiasts alike, providing a solid foundation for an immersive audio experience.

The Marantz SR5004 is built on core features that focus on the highest quality audio. It boasts a power output of 100 watts per channel, enabling it to drive a wide range of speakers with ease. One of its signature technologies is the inclusion of Marantz's proprietary HDAM (High Definition Amplifier Modules), which significantly enhances the amplifier performance. This results in lower noise levels and higher dynamic range, allowing for clearer and more detailed sound reproduction.

The receiver supports multiple audio formats and is equipped with five HDMI inputs and one output, making it versatile for connecting various devices like Blu-ray players and gaming consoles. Additionally, it features 7.1 channel surround sound, ensuring a full, immersive audio experience for home theater setups. Another important aspect of the SR5004 is its robust video processing capabilities, which support 1080p video upscaling, thereby enhancing the visual performance of standard-definition content.

The SR6004, on the other hand, takes performance a step further. With an impressive power output of 110 watts per channel, it can handle more demanding speaker configurations. The SR6004 also features Marantz's proprietary Audyssey MultEQ technology, which automatically calibrates your speakers to the acoustics of your room, optimizing sound distribution across all seating positions. It is particularly beneficial for larger rooms where audio performance can vary significantly.

Both models support advanced networking capabilities, featuring Ethernet ports that allow streaming of music from various online platforms. The SR6004 goes further with its compatibility with DLNA streaming, offering a seamless way to access digital music files from a home network.

In terms of connectivity, both receivers offer a range of inputs and outputs, including component, composite, and optical audio connections, providing flexibility for any setup.

With sleek designs and intuitive interfaces, the Marantz SR5004 and SR6004 are user-friendly, making them accessible for both novices and seasoned enthusiasts. Whether for a movie night or a rich listening session, these receivers match audio quality with modern technology, making them a sound investment for any home theater system.

Marantz SR5004, SR6004 manual Important Safety Instructions

Models: SR6004 SR5004

RISK OF ELECTRIC SHOCK

DO NOT OPEN