3 SURROUND SETUP
This menu is for setting surround effect parameters for the various surround input signals so as to bring
After you complete this portion of the setup, move the cursor to “Return” with the 3, 4 cursor buttons and press the ENTER button.
3-1 CHANNEL LEVEL
1. Select “Surround Setup” from Main Menu with 3 or 4 cursor buttons and press the
ENGLISH
SETUP | NAMES AND | FUNCTIONS | |
Surround Back Left or Right: | |||
Set the effect level of the Surround Back speaker | |||
between | |||
|
|
out the live audio effect of your speaker system.
1. Select “Surround Setup” from the Main Menu with the 3 or 4 cursor buttons and press the ENTER button.
2. Select the desired menu with the 3 or
4 cursor buttons and press the ENTER button.
Surround Setup
Channel Level
PLx Music Parameter
CS Parameter
NEO: 6 Parameter
LFE Level
Return
: Up / Down:
:Off
:0dB
:Off
Enter : Select | Exit : Exit |
ENTER button.
2. Select “Channel Level” with the 3 or 4 cursor buttons and press the ENTER button.
3. Set the Surround Mode with the 1 or 2 cursor buttons.
Channel Level |
Surround Mode |
• If “None” was selected for the surround back | BASIC CONNECTIONS | |
speakers setting in the Speaker Size, then this | ||
setting will not appear. | ||
Front Height Left or Right: | ||
Set the effect level of the front height speaker | ||
between | ||
• If “None” was selected for the front height | ||
| ||
speakers setting in the Speaker Size, then this |
| |
setting will not appear. |
|
• Channel level:
• PLIIx Music Parameter:
• CSII Parameter:
• NEO:6 Parameter:
• HT-EQ:
Select to active the
The total balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments.
Activating the
The
•7.1 CH INPUT
•PURE DIRECT
•SOURCE DIRECT
•Dolby Head Phone
•When VIRTUAL is set for the surround mode
•LFE Level:
Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal.
Select “0dB”,
• M-DAX:
Select the desired
Select “High”, “Low” or “Off” with the 1 or 2 cursor button. (See page 41)
☞P. 33
Channel Level |
|
|
|
Surround Mode | : Auto |
| |
Front Height Left | : 0.0dB |
| |
Center |
| : 0.0dB |
|
Front Height Right | : 0.0dB |
| |
Surround Right | : 0.0dB |
| |
Surround Back Right | : 0.0dB |
| |
Surround Back Left | : 0.0dB |
| |
Surround Left |
| : 0.0dB |
|
Subwoofer |
| : 0.0dB |
|
Return |
|
|
|
: Up / Down | : Change | Enter : | Exit : Exit |
☞ P. 34
PL x Music Parameter |
|
| |
ParameterCenter | : Default |
| |
Panorama |
| : Off |
|
Dimension |
| : 0 |
|
Center Width |
| : 3 |
|
Return |
|
|
|
: Up / Down | : Change | Enter : | Exit : Exit |
|
| ☞ P. 34 |
|
|
| CS Parameter |
|
|
| TrubassCenter | : 0 |
|
| SRS Dialog | : 0 |
Return
: Up / Down | : Change | Enter : | Exit : Exit |
☞ P. 34
NEO: 6 Parameter |
|
Center Gain | : 0.3 |
Return
: Up / Down | : Change | Enter : | Exit : Exit |
|
| : Auto |
|
Front Height Left | : 0.0dB |
| |
Center |
| : 0.0dB |
|
Front Height Right | : 0.0dB |
| |
Surround Right | : 0.0dB |
| |
Surround Back Right | : 0.0dB |
| |
Surround Back Left | : 0.0dB |
| |
Surround Left |
| : 0.0dB |
|
Subwoofer |
| : 0.0dB |
|
Return |
|
|
|
: Up / Down | : Change | Enter : | Exit : Exit |
4. Select the desired menu item with the 3 or 4 cursor buttons, set the desired level with the 1 or 2 cursor buttons, and press the ENTER button.
Surround Mode:
The surround mode can be independently set for 3 modes.
1.Multi Ch STEREO
2.CSII
3.Others
CHANNEL LEVEL
Center:
Set the effect level of the center speaker between
•If “None” was selected for the center speaker setting in the Speaker Size, then this setting will not appear.
Surround Left or Right:
Set the effect level of the Surround speaker between
•If “None” was selected for the surround speakers setting in the Speaker Size, then this setting will not appear.
Subwoofer: | BASIC OPERATION | |
Set the effect level of the subwoofer speaker | ||
between | ||
• If “No” was selected for the subwoofer speaker |
| |
setting in the Speaker Size, then this setting will | ADVANCED CONNECTIONS | |
not appear. | ||
Note | ||
• Setting to a mode other than multichannel stereo | ||
or CSII will affect the speaker level as explained | ||
in | ||
| ||
After you complete this portion of the setup, move | SETUP | |
the cursor to “Return” with the 3 or 4 cursor | ||
buttons and press the ENTER button to go to the | ||
Surround Setup menu. | ||
| ||
| ADVANCED OPERATION | |
| TROUBLESHOOTING | |
| OTHERS |
33