Example:
list
Maximum frame size in bytes = 2048
Encoding: NRZ
Idle State: Flag
Clocking: External
Cable Type: RS-232 DTE
Speed (bps): 0
Transmit Delay Counter: 0
Maximum frame size in bytes
Maximum frame size that can be sent over the link. The maximum
frame size must be large enough to accommodate the largest frame
and the 15 byte SRLYheader.
Encoding
The transmission encoding scheme for the serial interface. Scheme
is NRZ (non-return to zero) or NRZI (non-return to zero inverted).
Idle State
The data link idle state: flag or mark.
Clocking
The type of clocking: internal, external.
Cable Type
The serial interface cable type.
Speed (bps)
Lists the speed of the transmit and receive clocks.
Transmit Delay Counter
Number of flags sent between consecutive frames.
List (for protocol SDLC)
Use the list command to display the configuration of a specific group or of all
groups.
Syntax:
list all
group...
all Displays the configurations of all local ports.
Example: list all
SDLC Relay Configuration
Group Number Port Status Net SDLC Station IP Address
Number address (hex)
-------------- ----------------- ------ ------------- ------------
1 (E) Local PRMRY (D) 2
1 (E) Remote SCNDRY (E) 128.185.452.11
2 (D) Local PRMRY (D) 1
2 (D) Remote SCNDRY (D) 128.185.450.31
Group Number
Indicates the group number and the status of the group, enabled
(E) or disabled (D).
Port Status
Indicates the type of port (local/remote primary/secondary) and its
status, enabled (E) or disabled (D).
Configuring and Monitoring SDLC Relay
Chapter36. Configuring SDLC Relay 529