IBM SC30-3681-08 manual BSC Relay Monitoring Commands, Syntax Clear Example

		Con®guring and Monitoring BSC Relay
	* talk 5
+
	The system displays the GWCON prompt (+) on the console. If the prompt does
	not appear when you ®rst enter GWCON, pressReturn again.
2. At the GWCON prompt, enter the con®guration command to see the protocols
	and networks for which the router is con®gured. For example:
	+ configuration
	See page 130 for more sample output from the con®guration command.
3. Enter the protocol BRLY command. For example:
	+ prot brly
	BSC Relay>
	The system displays the BSC Relay prompt on the console. You can then view
	information about the BSC Relay ports by entering the BSC Relay monitoring
	commands.
BSC Relay Monitoring Commands
This section summarizes, and then explains the BSC Relay monitoring commands.
The BSC Relay monitoring commands allow you to view parameters for interfaces
that transmit BSC Relay frames. The system displays the BSC Relay> prompt for all
BSC Relay monitoring commands. Table 74 shows the commands.
	Table 74. BSC Relay Monitoring Commands Summary
	Command	Function
	? (Help)	Displays all the commands available for this command level or lists
		the options for speci®c commands (if available). See ªGetting Helpº
		on page 10.
	Clear	Clears BSC Relay statistics.
	Disable	Suppresses groups and ports.
	Enable	Turns on groups and ports.
	List	Displays entire BSC Relay and group speci®c con®gurations.
	Exit	Returns you to the previous command level. See ªExiting a Lower
		Level Environmentº on page 11.
Clear
Use the clear command to discard the BSC Relay statistics for all ports. The
statistics include counters for packets forwarded, and packets discarded. The
command clears local and remote port statistics that is gathered since the last time
you restarted the router or cleared statistics.
Syntax:
clear
Example:
clear
Clear all port statistics? (Yes or No): Y

Chapter 40. Con®guring and Monitoring BSC Relay 575