Chapter 24. Configuring and Monitoring LAN EmulationClients
This chapter describes how to configure LAN Emulation Clients (LECs). It includes
the following sections:
v“Configuring LAN Emulation Clients”
v“Configuring an ATMForum-Compliant LE Client” on page 295
v“Accessing the LEC Monitoring Environment” on page308
v“LEC Monitoring Commands” on page309

Configuring LAN Emulation Clients

This section summarizes and explains the commands for configuring and using the
set of LE Clients on a particular ATMinterface.
Toget to the LE Client Config> prompt, enter le-c at the ATM Config> prompt as
described in “ATM Configuration Commands”on page 278.
Enter the commands at the LE Client Config> prompt under the ATM Config>
prompt, as described in “ATM Configuration Commands”on page 278.
Table41. LAN EMULATION Client Configuration Commands Summary
Command Function
? (Help) Displays all the commands available for this command level or lists the
options for specific commands (if available). See “Getting Help” on page 10.
Add Adds a LEC for the following types ofATM Forum-compliant Emulated LANs
architectures:
vEthernet
vTokenRing
Config Gets you to the LEC Config> prompt, from which you can configure a specific
LAN Emulation Client.
List Lists the LEC.
Remove Removesa LEC.
Exit Returns you to the previous command level. See “Exiting a Lower Level
Environment” on page 11.
Add
Use the add command to add a LEC for a Token-Ringor Ethernet emulated LAN.
Syntax:
add Ethernet
TokenRing
token-ring
Token-ringemulated LAN
Example: add token ring
LE Client Config> add token-ring
Added Emulated LAN as interface 3
© Copyright IBM Corp. 1994, 1998 293