IBM SC30-3681-08 manual Syntax List All Group, All Displays the congurations of all local ports

Con®guring and Monitoring SDLC Relay

group group#

Allows transfer of SDLC Relay frames to or from the speci®ed group (group#).

port Allows transfer of SDLC Relay frames to or from the speci®ed local port.

Example:

enable port

Interface number: [0]? 2

(P)rimary or (S)econdary: [s]? P

Interface number

Indicates the interface number of the local port that you want to enable.

Primary or Secondary

Indicates whether the port is a primary or secondary.

List

Use the list command to display the con®guration of a speci®c group or of all groups.

Syntax:
list	all
	group . . .

all Displays the con®gurations of all local ports.

Example:

list all

		SDLC Relay	Configuration
Group		Port Status	Net	Packets		IP Address
Num			Num	fwrd	disc
1	(E)	Local PRMRY (E)	2	2880	57
1	(E)	Remote SCNDRY (E)		4860	13	128.185.452.11
2	(D)	Local PRMRY (D)	1	0	0
2	(D)	Remote PRMRY (D)		0	0	128.185.450.31

Group Number

Indicates the group number and the status of the group, enabled

(E) or disabled (D).

Port Status

Indicates the type of port (local/remote primary/secondary) and its status, enabled (E) or disabled (D).

Net Number

Indicates the device number of the local port. This number matches the number displayed using the Config> list devices command.

Packets (fwrd and disc)

Indicates how many packets were forwarded (fwrd) and discarded (disc) for that port.

IP Address

Indicates the IP address of the remote port.

group group#

Displays the con®gurations of a speci®ed group.

Example:

534MRS V3.2 Software User's Guide