Avaya X330WAN manual Set snmp trap auth, Set snmp trap enable frame-relay

Chapter 6 X330WAN CLI Commands

vlan_violation (Optional) Specify the VLAN violation trap from the TRAP- MIB.

Example

•To add an entry to the SNMP trap receiver table:

X330WAN-2DS1-1(super)#set snmp trap 192.168.173.42

SNMP trap receiver added.

•To enable SNMP vlan_violation traps to a specific manager:

X330WAN-2DS1-1(super)#set snmp trap 192.168.173.42 enable vlan_violation

SNMP vlan_violation change traps enabled.

•To enable all traps to a specific manager:

X330WAN-2DS1-1(super)#set snmp trap 192.168.173.42 enable all

All SNMP traps enabled.

•To disable SNMP vlan_violation traps to a specific manager:

X330WAN-2DS1-1(super)#set snmp trap 192.168.173.42 disable vlan_violation

SNMP vlan_violation traps disabled.

set snmp trap auth

Use the set snmp trap auth commands to enable/disable the sending of SNMP traps upon SNMP authentication failure.

Syntax

set snmp trap {enabledisable} auth

Example

X330WAN-2DS1-1(super)#set snmp trap enable auth

Authentication trap enabled

set snmp trap enable frame-relay

Use the set snmp trap enable frame-relaycommand to enable the DLCI link state SNMP traps. The traps are disabled by default.

Syntax

set snmp trap enable frame-relay

Example

X330WAN-2DS1-1(super)#set snmp trap enable frame-relay

100 Avaya X330WAN User’s Guide