Fast Ethernet Interface CLI Commands
Avaya X330WAN User’s Guide 113
duplex (FastEthernet interface context)
Use the duplex command to control the duplex setting for the interface.
Note: This command functions only in no autoneg mode.
Syntax
duplex {full|half}
Parameters
Example
X330WAN-2DS1-1(config-if:FastEthernet1)# duplex full
interface FastEthernet
Use the interface FastEthernet command to create and/or enter interface
Fast Ethernet context. For LAN interfaces, use this command to create the
interface. The no form of this command deletes an IP interface.
Syntax
[no] interface FastEthernet [interface number[.ip-interface]]
Parameters
Example
X330WAN-2DS1-1(configure)# interface FastEthernet 1
X330WAN-2DS1-1(configure)# interface FastEthernet 1.1
X330WAN-2DS1-1(configure)# no interface FastEthernet 1.1
full Full duplex.
half Halp duplex.
interface number An integer with a value of 1.
ip-interface The IP interface number within this interface (a number of
IP interfaces may be bound to a Layer 3 interface). An
integer from 0 to 1024.