Avaya X330WAN manual Ip netmask-format, No ip netmask-format mask-format

Chapter 6 X330WAN CLI Commands

Parameters

The possible values of direction are:

both	NETBIOS packets received on the interface are rebroadcast to other
	interfaces and NETBIOS packets received on other interfaces are
	rebroadcast to this interface.
	If no parameter is provided in the command, the "both" option is
	applied as the default.
disable	NETBIOS packets are not rebroadcast in or out of this interface.

Example

To enable rebroadcasting of NETBIOS packets received by and sent from the FastEthernet interface:

X330WAN-2DS1-1(super-if:FastEthernet1)# ip netbios-rebroadcast both

ip netmask-format

Use the ip netmask-formatcommand to specify the format of netmasks in the show command output. The no form of this command restores the format to the default, which is a dotted decimal format.

Syntax

[no] ip netmask-format <mask-format>

Parameters

The possible mask formats are:

bitcount	Addresses are followed by a slash and the total number of bits in
	the netmask, such as 17.
decimal	The network masks are in dotted decimal notation, such as
	255.255.255.0.
hexadecimal	The network masks are in hexadecimal format as indicated by
	the leading 0X, such as 0XFFFFFF00.

Example

To display netmasks in bitcount format:

X330WAN-2DS1-1(configure)# ip netmask-format bitcount

178 Avaya X330WAN User’s Guide