General: Device Commands

set logout

Use the set logout command to set the number of minutes until the system automatically disconnects an idle session.

Syntax

set logout [timeout]

Parameters

timeout Number of minutes (0 to 999) until the system automatically disconnects an idle session. Setting the value to 0 disables the automatic disconnection of idle sessions (default is 15 minutes).

Example

To set the number of minutes until the system disconnects an idle session automatically:

X330WAN-2DS1-1(super)# set logout 20

Sessions will be automatically logged out after 20 minutes of idle time.

Example

To disable the automatic disconnection of idle sessions:

X330WAN-2DS1-1(super)# set logout 0

Sessions will not be automatically logged out.

set snmp trap

Use the set snmp trap commands to add an entry to the SNMP trap receiver table and to enable or disable the different SNMP traps for a specific receiver. First add the rcvr_addr and then enable/disable the different traps.

Syntax

set snmp trap <rcvr_addr>

set snmp trap <rcvr_addr> {enabledisable} {allvlan_violation...}

Parameters

rcvr_addr

IP address of the system to receive SNMP traps.

enable

Activate SNMP traps.

disable

Deactivate SNMP traps.

all

(Optional) Specify all trap types.

Avaya X330WAN User’s Guide

99

Page 121
Image 121
Avaya X330WAN manual Set logout timeout, Set snmp trap rcvraddr