
Layer 3 CLI Commands
show ip ospf neighbor
Use the show ip ospf neighbor command to display OSPF neighbor information on a
Syntax
show ip ospf neighbor [<interface-name>] [<neighbor-id>]
Parameters
A string representing the OSPF interface name. | |
The OSPF Neighbor ID, an IP address. |
Note: To define a name that includes spaces, enclose the entire name in quotation marks (e.g., “New York”).
Example
Priority | State | Router ID | Time To Live | |
10.0.17.2 | 1 | 2 Way | 212.150.244.1 | 36 |
10.0.17.3 | 12 | Full | 10.0.17.3 | 38 |
10.0.17.6 | 18 | Full | 10.0.17.6 | 33 |
10.0.18.2 | 1 | Full | 105.1.12.1 | 107 |
10.0.20.2 | 0 | Full | 62.56.252.253 | 40 |
18.18.18.2 | 1 | Full | 62.56.255.254 | 38 |
192.168.6.173 | 0 | Full | 172.18.21.254 | 4 |
show ip protocols
Use the show ip protocols command to display parameters and statistics of the IP routing protocol process.
Syntax
show ip protocols [<protocol>]
Parameters
protocol | RIP OSPF |
Example
show ip protocols Displays all running protocols details.
Avaya X330WAN User’s Guide | 201 |