Avaya X330WAN manual Show frame-relay lmi, Field Description

Chapter 6 X330WAN CLI Commands

show frame-relay lmi

Use the show frame-relay lmi command to display the Frame Relay LMI statistics.

Syntax

show frame-relay lmi [interface <interface name>]

Parameters

interface name The name of the interface whose statistics are to be displayed.

Example

X330WAN-2USP-1(super)# show frame-relay lmi

LMI Statistics for interface Serial 1 (Frame Relay DTE)
LMI TYPE = Auto Detect Mode
Invalid Unnumbered info	0,	Invalid Prot Disc	0
Invalid dummy Call Ref	0,	Invalid Msg Type	0
Invalid Status Message	0,	Invalid Lock Shift	0
Invalid Information ID	0,	Invalid Report IE Len	0
Invalid Report Request	0,	Invalid Keep IE Len	0
Num Status Enq. Sent	0,	Num Status msgs Rcvd	0
Num Update Status Rcvd	0,	Num Status Timeouts	0

The following is a description of the show frame-relay lmi output fields:

Field	Description
LMI TYPE	The signalling or LMI specification: detected ANSI, detected
	ITU-T, or Auto Detect mode.
Invalid	The number of LMI messages received with invalid,
Unnumbered info	unnumbered information fields.
Invalid Prot	The number of LMI messages received with invalid protocol
Disc	discriminators.
Invalid dummy	The number of LMI messages received with invalid dummy call
Call Ref	references.
Invalid Msg	The number of LMI messages received with invalid message
Type	types.
Invalid Status	The number of LMI messages received with invalid status
Message	messages.

148 Avaya X330WAN User’s Guide