
Chapter 6 X330WAN CLI Commands
Parameters |
|
An integer from 1 to 99. | |
type | [in out] |
The interface type, a string. | |
The interface number. | |
protocol | [static ospf] |
| Protocol is only relevant for outgoing (out) list entries. |
Example
"FabricFastEthernet 1"
"Serial 1:1"
fragment chain
Use the fragment chain command to set the maximum number of fragments that can comprise a single IP packet destined to the router. The no form of this command sets the fragment chain to the default value (64).
Note: No IP reassembly is performed on packets in transit through the router.
Syntax
[no] fragment chain <chain-limit>
Parameters
Example
168 | Avaya X330WAN User’s Guide |