Avaya X330WAN manual Show ip route static, Show ip route summary

Chapter 6 X330WAN CLI Commands

show ip route static

Use the show ip route static command to display the static routes.

Syntax

show ip route static [<ip addr> [<mask>] ]

Parameters
ip-addr	The IP address of the routes.
mask	The IP mask of the routes.
Example

show ip route static

show ip route static 137.32.50.13

show ip route static 137.44.50.13 255.255.255.0

Output Example

Display all static routes. Display a single static route. Display a range of static routes.

Router-1 (super)# show ip route static
X330WAN-2DS1-1(super router:ospf)# show ip route static
Showing 1 rows
Network	Mask	Interface	Next-Hop	Cost	Pref	Perm	Active
-------	----	----------	-----------	----	----	----	-------
0.0.0.0	0	FastEth 1	149.49.75.1	1	low	No	Yes

where Pref is the preference, and Perm is Permanent.

show ip route summary

Use the show ip route summary command to display the number of routes known to the device.

Syntax

show ip route summary

Example

X330WAN-2DS1-1(super router:ospf)# show ip route summary X330WAN-2DS1-1(super)# show ip route summary

Route Source	Networks	Subnets
----------------	----------------	----------------
Local	0	1
Static	0	1
Total	0	2

204 Avaya X330WAN User’s Guide