Avaya X330WAN manual Show ip reverse-arp, MAC address, Number of bytes in the address to match

Chapter 6 X330WAN CLI Commands

show ip protocols RIP Displays RIP details.

Output Example

Routing Protocol is "rip"

Sending updates every 30 seconds, next due in 0 seconds

Invalid after 180 seconds, flushed after 300

Redistributing: rip

Default version control: rip version 1

Interface		Version Key
Routing	for Networks:
Routing	Information Sources:
Gateway		Last Update

show ip reverse-arp

Use the show ip reverse-arpcommand to display the IP address of a host, based on a known MAC address.

Syntax

show ip reverse-arp<mac addr> [<match len>]

Parameters
mac addr	MAC address.
match len	The number of bytes in the address to match.
Example
show ip reverse-arp 00:40:0d:67:53:04		List IPs that match the MAC.
show ip reverse-arp 00:40:0d:00:00:00 3		List IPs that match a vendor MAC.

Output Example

X330WAN-2DS1-1(super)#show ip reverse-arp 00:10:a4:98:97:e0

Showing 1 rows
Address	MAC Address	I/F	Type	TTL
---------------	----------------- ----------- ------- --------
149.49.70.68	00:10:a4:98:97:e0	e-70	Dynamic	14355

202 Avaya X330WAN User’s Guide