Avaya X330WAN manual Clear ip route, Clear ip traffic

Chapter 6 X330WAN CLI Commands

clear ip route

Use the clear ip route command to delete all the dynamic routing entries from the routing table.

Syntax

clear ip route * <ip-addr> [<ip-mask>]

ip-addr	IP address.
ip-mask	IP mask address.
Example
clear ip route *		Clears the entire routing table.
clear ip route 192.168.49.1 255.255.255.0		Clears a range of entries.

clear ip traffic

Use the clear ip traffic command to clear the IP counters.

Syntax

clear ip traffic

Example

X330WAN-2DS1-1(super)# clear ip traffic

default-metric (Interface context)

Use the default-metriccommand to set the interface Routing Information Protocol (RIP) route metric value. The no form of this command restores the default value (1).

Note: This command is executed from the Loopback, Serial, Fast Ethernet, and FabricFastEthernet interfaces.

Syntax

[no] default-metric <number>

Parameters

number The interface route metric value. The range is 1 to 15.

Example

X330WAN-2DS1-1(configure:interface)# default-metric 10

166 Avaya X330WAN User’s Guide