Avaya X330WAN Ip ospf dead-interval Interface context, Ip ospf hello-interval Interface Mode

Chapter 6 X330WAN CLI Commands

ip ospf dead-interval (Interface context)

Use the ip ospf dead-intervalcommand to configure the interval before declaring the neighbor as dead. The no form of this command sets the dead-interval to its default. The default is 40.

Note: This command is executed from the Serial, Loopback, Fast Ethernet, and FabricFastEthernet interfaces.

Syntax

[no] ip ospf dead-interval <seconds>

Parameters

seconds An integer from 1 to 415029.

Example

ip ospf dead-interval 15

ip ospf hello-interval (Interface Mode)

Use the ip ospf hello-intervalcommand to specify the time interval between hello packets the router sends. The no form of this command sets the hello-interval to its default. The default is 10 seconds.

Note: This command is executed from the Serial, Loopback, Fast Ethernet, and FabricFastEthernet interfaces.

Syntax

[no] ip ospf hello-interval <seconds>

Parameters

seconds An integer from 1 to 65535.

Example

ip ospf hello-interval 5

180 Avaya X330WAN User’s Guide