Layer 3 CLI Commands

 

 

preference

Preference, either High or Low. The default is Low.

permanent

The route is not disabled if the interface is down.

Example

X330WAN-2DS1-1(super)#ip default-gateway 132.55.4.45 4 high

X330WAN-2DS1-1(super)#ip default-gateway Serial 1:1 permanent

X330WAN-2DS1-1(super)# no ip default-gateway

ip directed-broadcast (Interface context)

Use the ip directed-broadcastcommand to enable net-directed broadcast forwarding. The no form of this command disables net-directed broadcasts on an interface.

Note: This command is executed from the Serial, Fast Ethernet, and

FabricFastEthernet interfaces.

Syntax

[no] ip directed-broadcast

ip distribution access-default-action

Use the ip distribution access-default-action command to set the default action for a specific Policy list.

Syntax

ip distribution access-default-action <list-number><default-action>

Parameters

list-number

An integer from 1 to 99.

default-action default-action-denydefault-action-permit

Example

X330WAN-2DS1-1(configure)#ip distribution access-default-action 1 default-action-deny

Avaya X330WAN User’s Guide

173

Page 195
Image 195
Avaya X330WAN Ip directed-broadcast Interface context, Ip distribution access-default-action, No ip directed-broadcast