Avaya X330WAN Interface Serial CLI Commands, Show controllers remote, Shutdown Controller context

Interface Serial CLI Commands

show controllers remote

Use the show controllers remote command to display far end performance data through an FDL message.

Note: This command is used when the fdl at&t option is defined.

Syntax

show controllers remote <port> <fdl-request-type>

Parameters
port	The number of the port.
fdl-request- type	Request types include:
	•	1h-data.
	• Enhanced-CI-configuration.
	•	Enhanced-1h.
	•	Errored-ESF-data.

Example

X330WAN-2DS1-1(super)#show controllers remote 1 1h-data

shutdown (Controller context)

Use the shutdown command to shutdown the E1/T1 link. This has the effect of administratively bringing the line down. In effect, it sends a 'blue alarm' on the line. The no form of this command reconnects the E1/T1 link.

Syntax

[no] shutdown

Interface Serial CLI Commands

This section contains a list of all Interface Serial related CLI commands.

backup delay (Serial interface context)

Use the backup delay command to set the switchover delay in case of failure.

Syntax

backup delay <failure delay> <secondary disable delay>

Avaya X330WAN User’s Guide 129