Frame Relay Configuration CLI Commands

Example

X330W-2USP-1(super-if:Serial2)# keepalive 10

Note: Entering keepalive 0 or setting no keepalive is equivalent to choosing the disable option in the frame-relaylmi-typecommand.

map-class frame-relay

Use the map-classframe-relaycommand to enter the map-class Frame Relay context. In this context you configure the map-class QoS. Use the no form of this command to delete a map class

Syntax

[no] map-class frame-relay <map-class-name>

Parameters

map-class-nameThe name of the map-class, a string.

Example

X330WAN-2USP-1(super)#map-class frame-relay voip

show frame-relay fragment

Use the show frame-relay fragment command to display the Frame Relay fragment statistics.

Syntax

show frame-relay fragment [interface <interface name><dlci number>]

Parameters

interface name The name of the interface whose statistics are to be displayed.

dlci number The DLCI number, an integer from 16 to 1007.

Example

X330WAN-2USP-1(super)#show frame-relay fragment

Avaya X330WAN User’s Guide

147

Page 169
Image 169
Avaya X330WAN manual Map-class frame-relay, Show frame-relay fragment, No map-class frame-relay map-class-name