Alpine TDM-9503R Specifications, Indication for CD Changer HI TEMP, Error, No Magzn, No Disc

Indication for CD Changer

HI TEMP

•Protective circuit is activated due to high temperature.

-The indicator will disappear when the temperature returns to within operation range.

ERROR - 01

•Malfunction in the CD Changer.

-Consult your Alpine dealer. Press the magazine eject button and pull out the magazine.

Check the indication. Insert the magazine again. If the magazine cannot be pulled out, consult your Alpine dealer.

•Magazine ejection not possible.

-Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer.

ERROR - 02

•A disc is left inside the CD Changer.

-Press the Eject button to activate the eject function. When the CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer.

NO MAGZN

•No magazine is loaded into the CD Changer.

-Insert a magazine.

NO DISC

•No indicated disc.

-Choose another disc.

Specifications

FM TUNER SECTION

Tuning Range	87.5 – 108.0 MHz
Mono Usable Sensitivity	0.7 µV
50 dB Quieting Sensitivity	1.1 µV
Alternate Channel Selectivity	80 dB
Signal-to-Noise Ratio	65 dB
Stereo Separation	35 dB
MW TUNER SECTION
Tuning Range	531 – 1,602 kHz
Sensitivity (IEC Standard)	25.1 µV/28 dB
LW TUNER SECTION
Tuning Range	153 – 281 kHz
Sensitivity (IEC Standard)	31.6 µV/30 dB
TAPE PLAYER SECTION
Tape Speed	1-7/8 ips (4.8 cm/sec) ±0.7%
Wow & Flutter	0.06% WRMS
Signal-to-Noise Ratio
With Dolby B-TYPE NR
(TDM-9505RB/TDM-9503R only) 68 dB
Without Dolby NR	60 dB
Frequency Response
With Alpine Test Tape	30–20,000 Hz

REMOTE CONTROL (TDM-9505RB/TDM-9503R only)

Battery Type	"AAA" size dry battery
Battery Quantity	2
Dimensions (W × H × D)	42 mm (1-21/32")
	× 121 mm (4-3/4")
	× 23 mm (15/16")
Weight (without battery)	50 g (1.8 oz)
GENERAL
Power Requirement	14.4 V DC
	(11–16 V allowable)
Maximum Power Output*	45 W × 4
Maximum Pre-Output Voltage	2 V/10k ohms
Bass	±15 dB at 30 Hz
Treble	±10 dB at 10 kHz
Weight	1.4 kg (3 lbs. 1 oz)
CHASSIS SIZE
Width	178 mm (7")
Height	50 mm (2")
Depth	155 mm (6–1/8")
NOSEPIECE SIZE
Width	170 mm (6–3/4")
Height	46 mm (1–13/16")
Depth	19 mm (3/4")

*Under maximum operating voltage and input signal, into 4 ohms.

Due to continuous product improvement, specifications and design are subject to change without notice.

19-EN