Alpine TDM-9501RM, TDM-9505RB, TDM-9503R owner manual Information, Case of Difficulty

Models: TDM-9501R TDM-9503R TDM-9501RM TDM-9505RB

1 29
Download 29 pages 17.42 Kb
Page 21
Image 21

Information

In Case of Difficulty

If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

Basic

No function or display.

Vehicle's ignition is off.

-If connected following instructions, the unit will not operate with the vehicle's ignition off.

Improper power lead connections.

-Check power lead connections.

Blown fuse.

-Check the fuse on the battery lead of the unit; replace with the proper value if necessary.

Internal micro-computer malfunctioned due to interference noise etc.

-Press the Reset switch with a ballpoint pen or other pointed article.

Radio

Unable to receive stations.

• No antenna or open connection in cable.

-Make sure the antenna is properly connected; replace the antenna or cable if necessary.

Unable to tune stations in the seek mode.

You are in a weak signal area.

-Make sure the tuner is in the DX mode.

If the area you are in is a primary signal area, the antenna may not be grounded and connected properly.

-Check your antenna connections; make sure the antenna is properly grounded at its mounting location.

The antenna may not be the proper length.

-Make sure the antenna is fully extended; if

broken, replace the antenna with a new one.

Broadcast is noisy.

The antenna is not the proper length.

-Extend the antenna fully; replace it if it is broken.

The antenna is poorly grounded.

-Make sure the antenna is grounded properly at its mounting location.

Cassette

Tape playback sounds dull.

The tape head needs cleaning.

-Clean the tape head.

Incorrect Dolby NR in use (TDM-9505RB/TDM- 9503R only).

-Check Dolby NR switch setting.

CD

CD Changer not functioning.

Out of operating temperature range +50˚C (+120˚F) for CD.

- Allow the vehicle's interior (or trunk) temperature to

cool.

CD playback sound is wavering.

Moisture condensation in the CD Module.

-Allow enough time for the condensation to evaporate

(about 1 hour).

Unable to fast forward or backward the CD.

The CD has been damaged.

-Eject the CD and discard it; using a damaged CD in

your unit can cause damage to the mechanism.

CD playback sound skips due to vibration.

Improper mounting of the CD Changer.

-Securely re-mount the CD Changer.

Disc is very dirty.

-Clean the disc.

Disc has scratches.

-Change the disc.

CD playback sound skips without vibration.

Dirty or scratched disc.

-Clean the disc; damaged discs should be replaced.

Single (8 cm) disc does not play.

Single CD adaptor is not used.

-Attach a single CD adaptor (recommended by Alpine) to the single disc and insert into the CD magazine.

18-EN

Page 21
Image 21
Alpine TDM-9501RM, TDM-9505RB, TDM-9503R owner manual Information, Case of Difficulty

TDM-9501R, TDM-9503R, TDM-9501RM, TDM-9505RB specifications

Alpine is renowned for its commitment to superior audio quality, and its TDM series, including the TDM-9505RB, TDM-9501RM, TDM-9501R, and TDM-9503R, exemplifies this dedication. Each of these models boasts an array of features designed to enhance the listening experience, showcasing cutting-edge technology tailored for modern audio needs.

The TDM-9505RB stands out with its advanced digital media receiver, which supports a wide range of audio formats, delivering crisp and clear sound. With Bluetooth connectivity, users can easily stream their favorite music from smartphones or tablets, while the built-in microphone facilitates hands-free calling. This model also integrates seamlessly with the latest smartphone applications, providing effortless access to navigation and music streaming services.

In comparison, the TDM-9501RM presents a sleek design coupled with high-resolution audio playback capabilities. It emphasizes user-friendly controls that allow for easy navigation through playlists and settings. The seven-band graphic equalizer offers customizable sound adjustments, ensuring a tailored listening experience. Its multi-device compatibility means it can connect with various sources, from traditional CD players to modern digital devices.

The TDM-9501R model focuses on robust connectivity options, featuring multiple USB ports and an auxiliary input that expands compatibility with different audio sources. This model also incorporates Alpineā€™s patented sound enhancement technologies, such as Dynamic Bass Enhancer, which ensures that bass frequencies are rich and powerful without distortion. Furthermore, the user can access various sound modes, allowing listeners to switch between settings for music, movies, or podcasts.

Lastly, the TDM-9503R combines functionality with versatility. This model includes a dual-zone output that allows for tailored audio experiences in separate cabin areas, perfect for larger vehicles. It also features a built-in digital signal processor (DSP) to optimize sound quality across diverse environments. The high-powered amplifier connected with high-impedance speakers ensures that sound is both loud and clear.

Together, the TDM series from Alpine revolutionizes audio performance in vehicles, providing customers with unmatched flexibility, connectivity, and sound quality. Whether for casual listening or for audiophiles seeking perfection, these models cater to all audio preferences with innovative technologies and robust features.