Remote Control Operation
1
2 5
6 7
8
9
3p
4q w
Controls on Remote Control
1Power Button
Press the button to turn the power on/off.
2Source Button
Press to select the audio source.
3
Press the button to switch between the Play and Pause modes for Tape or CD.
4TILT 89 Buttons This button is not used.
5Band/Program Button Radio mode: BAND Button
Press the button and the band will change as shown below.
→ FM1 → FM2 → MW → LW
Tape mode: PROG button
Press the button during tape play to change the tape direction to play the other side of the tape.
6Volume Adjustment Buttons To increase the volume level:
Press the button
To decrease the volume level: Press the button
78 Button
Radio mode: Pressing the button will select, in ascending order, stations programmed into the radio's presets as shown below.
→ 1 → 2 ... 6
CD Changer mode: DISC Select (UP) Button Press the button to select a disc in ascending order. Tape mode: Press the button once during tape play to advance to the beginning of the next selection.
Remote control sensor
8g DN Button
Radio mode: SEEK (DN) Button
CD changer mode: Press the button to go back to the beginning of the current track.
Tape mode: Press the button during tape play to fast rewind the tape respectively.
9f UP Button
Radio mode: SEEK (UP) Button
CD changer mode: Press the button to advance to the beginning of the next track.
Tape mode: Press the button during tape play to fast forward the tape respectively.
p9 Button
Radio mode: Pressing the button will select, in descending order, stations programmed into the radio's presets as shown below.
→ 6 → 5 ... 1
CD Changer mode: DISC Select (DN) Button Press the button to select a disc in descending order.
Tape mode: Press the button once during tape play to return to the beginning of the current selection being played.
qMute Button
Press the button to lower the volume by 20 dB instantly. Press the button again to cancel.
wAudio Processor Button This button is not used.