ENGLISH
INSTALLATION INSTRUCTIONS (continued)
Handling the Remote Controller
Loading Batteries
The life of the batteries used with the remote control unit is about 6 months with normal use. Also be sure to replace batteries earlier when you notice that they are getting weak. Do not use alkaline, manganese,
1) Remove the back cover.
2) Insert the new batteries (AA type) with correct (+) and
3)Close until it clicks.
Handling the Remote Controller |
|
|
|
|
|
| |
● Use the remote controller within about 15 feet from front of the |
|
|
|
|
|
| |
|
|
| |
|
|
| |
unit’s |
| With in 30 | |
degrees |
| degrees | |
About 15 feet
■ Do not use new and old batteries together. The batteries could explode or leak, resulting in fires, physical injury, or stains.
CAUTIONS ■ When loading batteries, observe their correct polarities as marked on the product. If loaded in the wrong direction, the batteries could explode or
leak, resulting in fires, physical injury, or stains.
| ■ Do not drop or impact the remote controller. |
| ■ Do not splash the remote controller with water or put it on a wet object |
| to avoid possible failures. |
| ■ Before leaving the remote controller out of use for an extended period of |
TIPS | time, remove the batteries from it. |
■ If the remote controller begins to lack responsiveness, replace the | |
| batteries. |
| ■ Strong light such as direct sunlight impinging on the photoreceptor of |
| the remote control can cause operational failure. Position this unit to |
| avoid direct contact with such light. |
8
