ENGLISH

OPERATING INSTRUCTIONS (continued)

On-Screen Display System

Either turn the remote controller jog dial to choose MENU and press the ENT button or press the main unit MENU button to open the Main Menu. The adjustment menu lets you program multiple

adjustments or settings by using the CURSOR/CONTROL buttons (on the remote controller, the

,

, , buttons; (on the main unit, the SELECT and VOLUME and buttons).

 

 

Press the SELECT button of the main unit (

or key of the remote controller) to select an item by moving the pink text.

Press the VOLUME button and the and keys of the main unit (or key of the remote controller) to adjust or set the selected item, or

to switch the menu.

When a choice is followed by “:”, it indicates that the choice can be adjusted or changed.

When a choice is followed by , a menu can be opened by pressing the remote-controller CURSOR/CONTROL button or the main unit SELECT button and VOLUME button .

When [RETURN] is selected, press the remote- controller button CURSOR/CONTROLor the main unit SELECT button and VOLUME button to exit to

the original menu

For information on adjusting and setting choices, see 13 to 16 .

 

Remote

 

 

controller

 

 

TV

 

 

MENU

 

 

 

0

ENT

 

ENT

CH

OK

VOL

 

 

Main unit

MENU

SELECT

VOLUME

Pink

MAIN MENU

PICTURE￿

SOUND￿

DISPLAY￿

FUNCTION￿

￿

Menu selection mark

Pink when brightness is selected

PICTURE MENU

CONTRAST

:117

BRIGHTNESS

: 0

COLOR

TINT

SHARPNESS

OPTIONS

RETURN

Guidance

Press the MENU button once again to exit the Main Menu.

The Main Menu will close automatically when no keys are entered for 10 seconds.

Useful

knowledge

It is recommended that, when inputting a computer signal to the main unit to get a grasp of the overall image, the DISPLAY AREA of a 1024 x 768 VESA display at 75Hz be set to FULL with SCAN set to INT. 14

Flicker can occur when a personal computer signal is input.If the vertical frequency is less than 75Hz, it is recommended that the vertical frequency be increased (upper limit: 75Hz).

HINTS

Burn-in (residual image) can occur if the same image is displayed for an extended time. To reduce this possibility, change the display contents at suitable intervals.

If special images created on a PC or any other equipment (such as those composed of a checker-flag pattern) are displayed across the screen, the hue may be varied depending on the contrast or brightness setting.

12

Page 22
Image 22
Marantz PD4298HD s user manual On-Screen Display System, To switch the menu