Avaya manual Avaya X330WAN User’s Guide 161

	General Layer 2 Interface CLI Commands
Field	Description
Reliability	The average interface availability, where the
	maximum=255/255, and the minimum=1/255.
Tx load	The transmitter traffic average bandwidth utilization, where the
	maximum=255/255, and the minimum=1/255.
Rx load	The received traffic average bandwidth utilization, where the
	maximum=255/255, and the minimum=1/255.
Encapsulation	The encapsulation method assigned to the interface.
Loopback	Displays if the loopback mode is set for the interface.
Link Status Trap	Displays if this trap is enabled for this interface.
Last input	Displays the time elapsed since the last packet was received on
	this interface (in hh:mm:ss).
Last output	Displays the time elapsed since the last packet was transmitted
	via this interface (in hh:mm:ss).
Last clearing of	Displays the time elapsed since the interface counters were last
show interface	cleared.
counters
VoIP mode	Displays the status of the VoIP mode on this interface (PPP and
enabled/disabled	Frame Relay interfaces).
Input drops	Displays the number of entering Rx packets dropped due to
	WRED and congestion in the Rx queues.
Output drops	Displays the number of Tx packets dropped due to WRED and
	congestion in the Tx queues, as well as the Frame Relay Policy.
‘n’ minute input	The average number of bits and packets received in the last ‘n’
rate	minutes, where ‘n’ is set using the load interval command.
	This does not appear for sub-interfaces.
‘n’ minute output	The average number of bits and packets transmitted in the last
rate	‘n’ minutes, where ‘n’ is set using the load interval
	command. This does not appear for sub-interfaces.
Packets input	The total number of packets received without error.
Bytes input	The total number of bytes in the packets received without error,
	including data and MAC encapsulation packets.

Avaya X330WAN User’s Guide 161