Avaya X330WAN manual Clear ip tcp header-compression PPP interface

Interface Serial CLI Commands

clear ip tcp header-compression (PPP interface)

Use the clear ip tcp header-compressioncommand to clear TCP compression statistics either for all enabled interfaces or for a specific interface. To clear for all enabled interfaces, do not enter an interface type and number.

Syntax

clear ip tcp header-compression[<interface type> <interface number>]

Parameters
interface type	The type of interface.
interface number	The interface number.

Example

X330WAN-2USP-1(super)#clear ip tcp header-compression

description (X330WAN-2USP Serial interface context)

Use the description command to set the description of the interface. The no form of this command removes the interface’s description.

Note: This command can also be executed from the Serial, Loopback, Fast Ethernet, and FabricFastEthernet interfaces.

Syntax

[no] description <desc>

Parameters

desc A string describing the interface, up to 80 characters.

Example

X330WAN-2DS1-1(config-if:FastEthernet1)# description vlan5

idle-character (X330WAN-2USP Serial interface context)

Use the idle-charactercommand to set the bit pattern used to indicate an idle line. The no form of this command restores flags as the idle line indicator (default).

Syntax

[no] idle-character {flagsmarks}

Avaya X330WAN User’s Guide 131