Avaya manual Clear controller counters X330WAN-2DS1, Clock source Controller context

Chapter 6 X330WAN CLI Commands

Note: If you issue this command with an existing channel-num, it is assumed that the timeslot-listis a list of timeslots that should replace the current list of timeslots already defined for that channel group.

Note: Channel groups, voice groups, and TDM groups all use group numbers. All group numbers configured for channel groups, voice groups, and TDM groups must be unique. For example, you can not use the same group number for a channel group and a TDM group.

Example

X330WAN-2DS1-1(config-controller:1)# channel-group 10 timeslots 10-

24

X330WAN-2DS1-1(config-controller:1)# channel-group 2 timeslots 5-6,8

clear controller counters (X330WAN-2DS1)

Use the clear controller counters command to reset the controller counters.

Syntax

clear controller counters [<controller number>]

Parameters

controller number The controller number, an integer.

Example

X330W-2DS1-1(super)#clear controller counters 1

clock source (Controller context)

Use the clock source command to configure the clock source for an E1/ T1 controller. The no form of this command returns the value to the default.

Syntax

[no] clock source {lineinternal}

118 Avaya X330WAN User’s Guide