Layer 3 CLI Commands

ip vrrp override addr owner

Use the ip vrrp override addr owner command to accept packets addressed to the IP address(es) associated with the virtual router, such as ICMP, SNMP, and TELNET (if it is not the IP address owner). The no form of this command discards these packets.

Note: This command is executed from the Fast Ethernet and FabricFastEthernet interfaces.

Syntax

[no] ip vrrp <vr-id>override addr owner

Parameters

vr-id

Virtual Router ID, an integer from 1 to 255.

Example

X330WAN-2DS1-1(configure)#ip vrrp 1 override addr owner

ip vrrp preempt

Use the ip vrrp preempt command to configure the router to preempt a lower priority master for the virtual router ID. The no form of this command disables preemption for the virtual router instance. By default, preemption is enabled.

Note: This command is executed from the Fast Ethernet and FabricFastEthernet interfaces.

Syntax

[no] ip vrrp <vr-id>preempt

Parameters

vr-id

Virtual Router ID, an integer from 1 to 255.

Example

X330WAN-2DS1-1(configure)# ip vrrp 1 preempt

Avaya X330WAN User’s Guide

189

Page 211
Image 211
Avaya X330WAN Ip vrrp override addr owner, Ip vrrp preempt, No ip vrrp vr-idoverride addr owner, No ip vrrp vr-idpreempt