Avaya X330WAN manual PPP Configuration CLI Commands, Show map-class frame-relay

PPP Configuration CLI Commands

show map-class frame-relay

Use the show map-classframe-relaycommand to display the map-class Frame Relay table.

Syntax

show map-class frame-relay

Example

X330WAN-2USP-1(super)#show map-class frame-relay

Showing 1 frame-relay map-class entry
Map Class Name	CIR	BC	BE	De Pre-Mark Fragment
--------------- --------- --------- ---------				----------- ---------
default	56000	7000	0	100%	0

PPP Configuration CLI Commands

This section contains a list of all PPP configuration related CLI commands.

ip tcp decompression-connections (PPP interfaces)

Use the ip tcp decompression-connectionscommand to set the number of TCP decompression connections. The no form of this command restores the default.

Syntax

[no] ip tcp decompression-connections [<number>]

Parameters

number The number of TCP decompression connections, an integer from 3-256. The default is 16.

Example

X330WAN-2USP(super)#ip tcp decompression-connections 20

keepalive (Serial interface context PPP encapsulation)

Use the keepalive command to enable PPP keepalive. The no form of this command disables PPP keepalive.

Syntax

[no] keepalive [<Seconds>]

Avaya X330WAN User’s Guide 151