Avaya manual Avaya X330WAN User’s Guide

Chapter 6 X330WAN CLI Commands

VoIP mode disabled.

5 minute input rate 358 bits/sec, 0 packets/sec

5 minute output rate 17792 bits/sec, 40 packets/sec

0 input drops, 0 output drops, 0 unknown protocols

4 packets input, 256 bytes

0 broadcasts received, 0 giants

0 input errors, 0 CRC, 0 abort

8 packets output, 384 bytes

0 output errors, 0 collisions

Serial 2:2 is up, line protocol is up

Internet address is 60.0.0.2, mask is 255.0.0.0 (advertised IPCP)

MTU 1500 bytes, Bandwidth 640 Kbit

Reliability 255/255 txLoad 1/255 rxLoad 1/255

Encapsulation PPP

Link status trap disabled

Keepalive not set

LCP Opened

IPCP Opened

Last input 00:06:03, Last output 00:00:08

Last clearing of 'show interface' counters 00:06:24

VoIP mode disabled.

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 1 bits/sec, 0 packets/sec

0 input drops, 0 output drops, 0 unknown protocols

3 packets input, 192 bytes

0 broadcasts received, 0 giants

0 input errors, 0 CRC, 0 abort

7 packets output, 320 bytes

0 output errors, 0 collisions Console asynchronous mode is terminal Terminal baud rate is 9600

Output Example of X330W-2USP with Frame Relay encapsulation sub-interfaces defined:

X330WAN-2USP-1(super)# show interfaces Serial

Serial 1	is	down, line protocol is down
MTU 1500	bytes, Bandwidth		2048	Kbit
Reliability		1/255 txLoad 1/255		rxLoad 1/255
Encapsulation FRAME-RELAY			IETF, loopback not set
Link status		trap disabled
LMI enq sent 0, LMI stat recvd				0, LMI upd recvd 0, DTE LMI down
158				Avaya X330WAN User’s Guide