Avaya X330WAN manual Show ip active-access-groups, Show ip composite-op

Policy CLI Commands

show ip active-access-groups

Use the show ip active-access-groupscommand to display all activated lists on all interfaces.

Syntax

show ip active-access-groups

show ip composite-op

Use the show ip composite-opcommand to show a composite operation of a Policy list.

Syntax

show ip composite-op[<policy-list-number>] [<composite-operation-

index>
Parameters
policy-list-number	The Policy list number, an integer from 100 to 149,
	where 0 is the default list.

composite-operation-indexIndex of the operation in the table.

Example

X330WAN-2DS1-1(configure)# show ip composite-op 101 11

validate-group (Interface context)

Use the validate-groupcommand to verify that all the rules in a priority list are valid.

Note: This command can only be executed from the Serial, Loopback, Fast Ethernet, and FabricFastEthernet interfaces of the X330WAN.

Syntax

validate-group<policy-list-number> <direction> [quiet]

Avaya X330WAN User’s Guide 221