Avaya X330WAN manual Reset, Set boot bank value

Chapter 6 X330WAN CLI Commands

reset

Use the reset command to restart the system.

If you want to keep changes you made to the current running configuration, use the copy running-configstartup-configcommand first.

Note: You should perform a reset after downloading software to the device.

Syntax

reset

Example

X330WAN-2DS1-1(super)# reset

This command will reset the module and may disconnect your telnet session.

***Reset the device *** - do you want to continue (Y/N)? y Connection closed by foreign host.

set boot bank

Use the set boot bank command to configure the software bank from which the device boots at the next boot process.

Syntax

set boot bank <value>

Parameters

value {bank-a bank-b}

Example

X330WAN-2DS1-1(super)# set boot bank bank-a

Boot bank set to bank-a

98 Avaya X330WAN User’s Guide