Panasonic DMCLZ5K, DMC-LZ5, DMC-LZ3, DMCLZ5S, DMCLZ3S, DMC-LZ4 operating instructions Economy, No.Reset

Preparation

[POWER SAVE] (Except for mode)

Press [ MENUSET ] to display the [SETUP] menu and select the item to set. (P20)

[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:

Power save mode is activated (the camera is automatically turned off to save the battery life) if the camera has not been used for the time selected on the setting.

[OFF]: Power save mode is not activated.

•Press the shutter button halfway or turn the camera off and on to cancel power save mode.

•In simple mode [ ], power save mode is fixed to [2MIN.].

•When using the AC adaptor (DMW-AC6; optional), connecting to a PC or a printer, recording or playing back motion pictures and during a slide show, power save mode is not activated. (However, the setting for power save mode is fixed to [10MIN.] while pausing a slide show or playing back a manual slide show.)

[ECONOMY]

( mode only)

Press [ MENUSET ] to display the [SETUP] menu and select the item to set. (P20)

Battery life is saved by reducing the brightness of the LCD monitor and turning it off automatically when the camera is not being used in recording mode. (P47) [LEVEL 1]: The LCD monitor turns off if the

camera is not operated for about 15 seconds in recording mode.

[LEVEL 2]: The LCD monitor turns off if the camera is not operated for about 15 seconds in recording mode or for about 5 seconds after taking a picture.

•The status indicator lights while the LCD monitor is turned off. Press any button to turn on the LCD monitor again.

22

•Power save mode is fixed to [2MIN.] in economy mode.

[However, power save mode is not activated when using the AC adaptor (DMW-AC6; optional).]

•Economy mode will not work when the menu screen is displayed or the self-timer is set.

[BEEP]

Press [ MENUSET ] to display the [SETUP] menu and select the item to set. (P20)

[	]: No operation sound
[	]: Soft operation sound
[	]: Loud operation sound

•The [BEEP] setting also affects simple mode [ ].

[NO.RESET]

Press [ MENUSET ] to display the [SETUP] menu and select the item to set. (P20)

Set this when you want the file number of the next recording to start from 0001. (The folder number is updated and the file number starts from 0001.)

•A folder number between 100 and 999 can be assigned.

When the folder number reaches 999, the number cannot be reset. We recommend formatting the card after saving the data on a PC or elsewhere.

•To reset the folder number to 100, format the built-in memory (P78) or the card first and then use this function to reset the file number.

A reset screen for the folder number will then appear. Select [YES] to reset the folder number.

•Refer to P81 for detailed information about the file number and the folder number.

•The [NO.RESET] setting also affects simple mode [ ].

VQT0U87