Panasonic DMCLZ3S Optical Image Stabilizer, This mode detects jitter and compensates for it

Advanced

Optical Image

Stabilizer

SCN1 SCN2

This mode detects jitter and compensates for it.

1 Press and hold the optical image stabilizer button A until [STABILIZER] appears.

2 Press 3/4 to select the stabilizer function mode and then press [MENU/SET].

		STABILIZER
		OFF
		MODE1
		MODE2
			MENU
		SELECT SET MENU DEMO.	SET
MODE1		The stabilizer operates
(	)	continuously and can assist
		during photo composition.

MODE2 The jitter is compensated for

( ) when the shutter button is pressed. There is a greater stabilizing effect.

OFF	When you want to take a picture
(	) with jitter.

∫Demonstration of the optical image stabilizer (Demonstration Mode)

Press 1 to display the demonstration. After the demonstration ends, the screen returns to the stabilizer function mode selection menu. Press 1 again if you want to exit the demonstration before it ends. While the demonstration is displayed, the optical

zoom is fixed to Wide (1k) and the zoom function cannot be activated. You also cannot take pictures.

•The stabilizer function may not be effective in the following cases.

–When there is a lot of jitter.

–When the zoom magnification is high

–In digital zoom range.

–When taking pictures while following a moving subject.

–When the shutter speed becomes

slower to take pictures indoors or in dark places.

Be careful of camera jitter when you press the shutter button.

•In simple mode [ ], the setting is fixed to [MODE1] and in [STARRY SKY] (P53) in

scene mode it is fixed to [OFF]. The stabilizer function mode selection menu does not appear.

•In motion picture mode [ ], [MODE2] cannot be set.

45

VQT0U87