Panasonic DMCLZ3S, DMC-LZ5, DMC-LZ3, DMCLZ5S, DMCLZ5K, DMC-LZ4 Macintosh, Folder Composition

Connecting to other equipment

•If you are connecting the camera to a PC for the first time, the required driver is installed automatically so that the camera can be recognized by Windows Plug and Play. The drive then appears on the [My Computer] folder.

[Macintosh]

The drive is displayed on the screen.

•The drive is displayed as [LUMIX] when you connect the camera with no card inserted.

•The drive is displayed as [NO_NAME] or [Untitled] when you connect the camera with a card inserted.

∫Folder Composition

Folders are displayed as shown in the following illustration.

≥Built-in memory	DCIM
≥SD Memory Card				100_PANA
≥MultiMediaCard
	1
		100_PANA
			P1000001.JPG
	2				3

P1000002.JPG

P1000999.JPG

101_PANA

999_PANA

MISC

1Folder number

2 File number

3 JPG: pictures MOV: motion pictures

The items in each folder are as follows.

DCIM	Folders from [100_PANA] to
	[999_PANA]
100_PANA	Pictures/motion pictures
to
999_PANA
MISC	Files on which the DPOF
	print settings are recorded

•The data for up to 999 pictures recorded by the camera can be included in 1 folder. If the number of pictures exceeds 999, another folder is created.

•To reset the file number or the folder number, select [NO.RESET] in the [SETUP] menu. (P22)

∫Conditions under which a different

folder number is used

In the following cases, the picture is not recorded in the same folder as the previously recorded picture. It is recorded in a folder with a new number.

1When the folder just recorded to contains a picture file with the number 999 in it (example: P1000999.JPG).

2When the card just recorded to contains, for example, a folder with the number 100 (100_PANA) in it and that card is removed and replaced with a card that has a folder with the number 100 in it recorded by a camera from a different maker (100XXXXX, with XXXXX being the name of the maker) and then a picture is recorded.

3When recording after selecting [NO.RESET] (P22) from the [SETUP] menu. (Pictures will be recorded to a new folder with a number sequential to the folder recorded to immediately before. By using [NO.RESET] on a card that does not contain folders or pictures, such as one just formatted, the folder number can be reset to 100.)

∫PictBridge (PTP) setting Even if you set [USB MODE] to [PictBridge (PTP)], you can connect to your PC if the OS is Windows XP Home Edition/ Professional or Mac OS X.

• Pictures can only be read on the camera. They cannot be written to a card or deleted.

• When there are 1000 or more pictures on a card, the pictures may not be imported.

81

VQT0U87