Panasonic DMC-LZ4, DMC-LZ5, DMC-LZ3, DMCLZ5S, DMCLZ3S, DMCLZ5K About the Built-in Memory/the Card

Preparation

2Insert:

Insert the card fully until it clicks and it is locked.

Remove:

Push the card until it clicks, then pull the card out upright.

•Check the direction of the card.

•Do not touch the connection terminals on the back side of the card.

•The card may be damaged if it is not fully inserted.

3 1 Close the card door.

2Slide the card door to the end and then close it firmly.

•If the card door cannot be completely closed, remove the card and insert it again.

•The card and the data may be damaged if it is inserted or removed while the camera is on.

•We recommend using Panasonic’s SD Memory Card.

About the Built-in Memory/the Card

∫Built-in Memory []

You can record or play back pictures on the built-in memory when you are not using a card.

•The built-in memory capacity is about 14 MB.

•Picture size is fixed to QVGA

(320k240 pixels) when recording motion pictures to the built-in memory. (P55)

∫Card [ ]

You can record or play back pictures on a card.

(The built-in memory cannot be used when a card is inserted.)

∫Access to the built-in memory or the

card

•The access indication lights red when pictures are being recorded on the built-in memory (or the card).

•Do not do the following when the access indication lights, pictures are being read or deleted or the built-in memory (or the card) is being formatted (P78).

–Turn the camera off.

–Remove the batteries or the card (if used).

–Shake or impact the camera.

–Disconnect the AC adaptor (DMW-AC6; optional). (when using the AC adaptor)

The card or the data may be damaged and the camera may not operate normally.

17

VQT0U87