Avaya X330WAN manual Ip redirects Interface context, Ip rip authentication key Interface context

Chapter 6 X330WAN CLI Commands

Syntax

[no] ip proxy-arp

Example

X330WAN-2DS1-1(configure)# no ip proxy-arp

ip redirects (Interface context)

Use the ip redirects command to enable the sending of redirect messages on the interface. The no form of this command disables the redirect messages. By default, sending of redirect messages on the interface is enabled.

Note: This command is executed from the Serial, Fast Ethernet, and

FabricFastEthernet interfaces.

Syntax

[no] ip redirects

Example

X330WAN-2DS1-1(super-if:FastEthernet1)# ip redirects

ip rip authentication key (Interface context)

Use the ip rip authentication key command to set the authentication string used on the interface. The no form of this command clears the password.

Note: This command is executed from the Serial, Loopback, Fast Ethernet, and FabricFastEthernet interfaces.

Syntax

[no] ip rip authentication key <password>

Parameters

password The authentication string for the interface. Up to 16 characters are allowed.

Example

X330WAN-2DS1-1(configure)#ip rip authentication key hush-hush

182 Avaya X330WAN User’s Guide