General: Device Commands

Table 6.1 X330WAN-2DS1 CLI Prompts (Continued)

• Interface Serial

X330WAN-2DS1-N(config- if:Serialn:x)#

X330WAN-2USP-N(config- if:Serialn)#

N is the number of the device in a stack of WAN devices, n is the number of the WAN port (1 or 2), Z is the interface number, and x is the number of the channel group.

General: Device Commands

This section contains a list of all general device CLI commands.

banner login

Use the banner login command to enter the login banner configuration mode. The no form of this command sets the login banner to the default.

Note: Before creating a new banner, delete the current banner using the no banner login command.

Syntax

[no] banner login

Example

X330WAN-2USP-1(super)# banner login

banner post-login

Use the banner post-logincommand to enter the post-loginconfiguration mode. The no form of this command sets the post-login banner to the default.

Note: Before creating a new banner, delete the current banner using the no banner post-logincommand.

Syntax

[no] banner post-login

Example

X330WAN-2DS1-1(super)# banner post-login

Avaya X330WAN User’s Guide

89

Page 111
Image 111
Avaya X330WAN manual General Device Commands, Banner login, Banner post-login, No banner login, No banner post-login