Avaya X330WAN manual No ip composite-op, Set qos policy-source, Show ip access-group

Chapter 6 X330WAN CLI Commands

no ip composite-op

Use the no ip composite-opcommand to delete a composite operation from a Policy list.

Syntax

no ip composite-op monitor <policy-list-number> <composite-operation- index>

Parameters

policy-list-number An integer from 100 to 149. 0 is the default list.

composite-operation-indexIndex of operation in the table to be deleted. Indices 0 - 12 can not be deleted.

Example

X330WAN-2DS1-1(configure)# no ip composite-op 101 15

set qos policy-source

Use the set qos policy-sourcecommand to set the Policy source. The default Policy source is policy-server.

Note: Before configuring the IP access list, you must change the Policy source mode to local.

Syntax

set qos policy-source <source>

Parameters

source local policy-server

Example

X330WAN-2DS1-1(configure)# set qos policy-source local

show ip access-group

Use the show ip access-groupcommand to display information about the configured active access groups.

Syntax

show ip access-group<interface name> [<directions>]

218 Avaya X330WAN User’s Guide