Chapter 6 X330WAN CLI Commands

show ip rtp header-compression

Use the show ip rtp header-compressioncommand to display all RTP compression statistics either for a specific interface or for all enabled interfaces.

Note: To display the statistics for all enabled interfaces, do not enter an interface name.

Syntax

show ip rtp header-compression [<interface name>]

Parameters

interface name The interface name.

Example

X330WAN-2DS1-1(configure)# show ip rtp header-compression Serial 1:1 IP RTP header compression statistics:

Interface Serial 1:2:

Rcvd: 1 Full Headers, 13194 Compressed, 0 Errors

Sent: 2 Full Headers, 209 Compressed,

7508 Bytes Saved, 5996 Bytes Sent,

2.25Efficiency Improvement Factor Connect: Active, 16 Rx Slots, 16 Tx Slots,

Max Time 5, Max Period 256

Interface Serial 1:3.1:

Rcvd: 0 Full Headers, 0 Compressed, 0 Errors

Sent: 0 Full Headers, 0 Compressed,

0 Bytes Saved, 0 Bytes Sent,

1.00Efficiency Improvement Factor Connect: Inactive, 16 Rx Slots, 16 Tx Slots,

Max Time 5, Max Period 256

136

Avaya X330WAN User’s Guide

Page 158
Image 158
Avaya X330WAN manual Show ip rtp header-compression interface name