191, Photo / Explanatory diagram, Procedure, Assembly

No.	Photo / Explanatory diagram	Procedure

Assembly

Return a set of the refrigeration cycle assembly into the outdoor unit base plate and reassemble sound

3insulation board, partition plate assembly, fan motor assembly, and side cabinet (R/L) as original. Fix the thermostat fixing plate to the side cabinet (R), built in the inverter assembly, and then connect various cables. After then, incorporate front cabinet, upper cabinet, wiring cover, and valve cover as before.

Return a set of the refrigeration cycle assembly into the outdoor unit base plate, and assemble sound insulation board, partition plate assembly, fan motor assembly, and side cabinet (R/L) as original.

3-1

		Using screws (Self-tapping screw type-B Ø4 × 8mm,
Thermostat fixing plate	Side cabinet (R)	stainless), fix the thermostat fixing plate to the side
		cabinet (R).

3-2

After incorporating the inverter assembly as before,

furthermore perform cable process for cord heater

Do not make cord heater loose.

and power cord.

Do not put the heating part near the electric parts box.

For the cord heater, perform cable process so that

there is no looseness or sag at the fan side.

Perform cable process for collected

cord heater and fan motor lead cables.

Perform cable process for the cord heater together

with the fan motor lead cable, and collect the re-

mained part of cables at cable process part of the

inverter.

Secure the power cord for the cord heater to the

terminal block mounting plate using the P-shape

3-3

P-shape

clamp

clamp, and pull it out from the wiring area of the side

cabinet (R).

* Check that there is the marked part of the cord

Power cord for

heater on the outdoor unit base plate or near it.

cord heater

When there is the heating part near the electric

parts box, a fire may generate.

To keep the lead wires from coming into contact with the

Since the lead wires connected to the cord heater

edges of the sheet metal or tips of the screws, wrap the

shield tubes around the leads to protect them and use

and thermostat may come into contact with the edges

the bundling ties to secure them.

of the sheet metal or tips of the screws, wrap the

shield tubes around the leads to protect them and

use the bundling ties to secure them.

3-4 Incorporate front cabinet, upper cabinet, wiring cover, water-proof cover and valve cover as before.

In installation work, connect power cord for the cord heater to another breaker separated from one for

power cord of the air conditioner.

Toshiba RAV-SM562UT-E, RAV-SM1102UT-E 191, Photo / Explanatory diagram, Procedure, Assembly

Models: RAV-SM562UT-E RAV-SM802UT-E RAV-SM1402UT-E RAV-SM1102UT-E

Assembly

– 191 –