No.

Item

Outline of specifications

Remarks

12Frequency fixed <In case of wired remote controller>

operation

1.

When pushing [CHECK] button for 4 seconds or more,

(Test run)

 

[TEST] is displayed on the display screen and the

 

 

mode enters in Test run mode.

 

2.

Push [ON/OFF] button.

 

3.

Using [MODE] button, change the mode from [COOL]

 

 

to [HEAT].

 

 

• Do not use other mode than [COOL]/[HEAT] mode.

 

 

•

During test run operation, the temperature cannot be

 

 

 

adjusted.

 

 

•

An error is detected as usual.

 

 

•

A frequency fixed operation is performed.

 

4.

After the test run, push [ON/OFF] button to stop the

 

 

operation. (Display in the display part is same as the

 

 

procedure in item 1).)

 

5.

Push [CHECK] button to clear the test run mode.

 

 

([TEST] display in the display part disappears and the

 

 

status returns to the normal stop status.)

<In case of wireless remote controller>

(Option for 4-way air discharge cassette type only)

1.Turn off the power of the set.

Remove the adjuster with sensors from the ceiling panel.

2.Turn Bit [1: TEST] of sensor P.C. board switch [S003] from OFF to ON.

Attach the sensor P.C. board cover and mount the adjuster with sensors to the ceiling panel.

Turn on the power of the set.

3.Push [ON/OFF] button of the wireless remote control- ler and set the operation mode to [COOL] or [HEAT] using [MODE] button.

(During test run operation, all the display lamps of wireless remote controller sensors flash.)

•Do not use other mode than [COOL]/[HEAT] mode.

•An error is detected as usual.

•A frequency fixed operation is performed.

4.After the test run, push [ON/OFF] button to stop the operation.

5.Turn off the power of the set.

Turn Bit [1: TEST] of sensor P.C. board switch [S003] from ON to OFF.

Mount the adjuster with sensors to the ceiling panel.

13 Filter sign display 1)

The operation time of the indoor fan is calculated, the [FILTER] goes on.

(Except wireless

filter reset signal is sent to the remote controller when

type)

the specified time (2500H) has passed, and it is

 

displayed on LCD.

2)

When the filter reset signal has been received from the

 

remote controller, time of the calculation timer is

 

cleared. In this case, the measurement time is reset if

 

the specified time has passed, and display on LCD

 

disappears.

– 65 –

Page 64 Page 66
Page 65
Image 65
Toshiba RAV-SM1402UT-E, RAV-SM1102UT-E, RAV-SM802UT-E, RAV-SM562UT-E Frequency fixed In case of wired remote controller
Page 64 Page 66

RAV-SM562UT-E, RAV-SM802UT-E, RAV-SM1402UT-E, RAV-SM1102UT-E specifications

Toshiba has established itself as a leading name in the field of heating, ventilation, and air conditioning (HVAC) systems. Among their extensive range, the RAV-SM802UT-E, RAV-SM1102UT-E, RAV-SM1402UT-E, and RAV-SM562UT-E stand out for their performance, efficiency, and innovative technology.

The Toshiba RAV-SM802UT-E is designed for medium-sized commercial spaces, providing a cooling capacity of 8 kW. It employs advanced inverter technology, which enables it to adjust the compressor speed based on the load demand. This adaptability leads to a significant decrease in energy consumption, making the unit both eco-friendly and cost-effective. The unit also features a high-efficiency rotary compressor and a wide operating temperature range, ensuring reliable performance even in extreme weather conditions.

Next in line, the RAV-SM1102UT-E offers an impressive 11 kW cooling capacity, making it suitable for larger commercial applications. This model incorporates Toshiba’s cutting-edge Superlink technology, which allows multiple indoor units to be connected to a single outdoor unit, providing flexible installation options. The RAV-SM1102UT-E is also equipped with a sleek and modern design that blends seamlessly with any architecture while ensuring low noise levels during operation, enhancing comfort in the workspace.

The RAV-SM1402UT-E is a powerhouse among the series, boasting a cooling capacity of 14 kW. It is built with an enhanced refrigerant management system that minimizes refrigerant leaks and optimizes thermal efficiency. This model supports smart building management systems, making it an ideal choice for tech-savvy businesses looking to integrate their HVAC systems into a broader energy management framework. Furthermore, it maintains high EU energy efficiency ratings, verifying Toshiba's commitment to environmental sustainability.

Lastly, the RAV-SM562UT-E, with its 5.6 kW cooling capacity, is tailored for smaller commercial environments and residential use. It retains all the core technologies featured in its counterparts, including inverter technology and a high-efficiency compressor, ensuring comfort without excessive energy usage. This model also includes a user-friendly remote control and programmable timer functions, allowing for customized comfort settings and enhanced convenience.

In summary, the Toshiba RAV-SM series represents the pinnacle of HVAC innovation, blending energy efficiency with advanced technology. Each model caters to specific needs, from the compact RAV-SM562UT-E to the robust RAV-SM1402UT-E, ensuring that every commercial and residential space can achieve optimal climate control.
Top Page Image Contents