16. CORD HEATER INSTALLATION WORK
This is on installation for 2 HP and 3 HP Products
In case of 4 HP or 5 HP, refer to this installation as reference.
1.Required parts for installation work (Recommendation)
The above products conform to RoHS (2002/95/EC). Therefore when procuring and using the following recommended parts at local site, it is recommended to confirm each part conforms to RoHS before use.
No. | Part name | Q’ty | Specifications/Vendor | Remarks |
|
|
|
|
|
1 | Cord heater | 1 | Drain line heaters CSC2 (3.0m, 40W/m) by Flexelec com. | Procured locally |
|
|
| (Please go to the following URL.) |
|
|
|
| http://www.flexelec.com |
|
|
|
|
|
|
2 | Thermostat | 1 | Procured locally | |
|
|
| Operating temperature: on 4 ± 4°C, off 15 ± 3°C |
|
|
|
| A thermostat holder is incorporated with a thermostat in the package. |
|
|
|
| (Please go to the following URL.) |
|
|
|
| http://www.asahikeiki.co.jp/product/product.html |
|
|
|
| On |
|
|
|
| company (For example, Texas Instruments) if its characteristics are |
|
|
|
| equivalent to those of ASAHI KEIKI. However, when the shape of the |
|
|
|
| thermostat holder is different from that of ASAHI KEIKI, apply some |
|
|
|
| treatment to No.14 thermostat fixing plate and then fix the holder. |
|
|
|
|
|
|
3 | Fuse | 1 | Procured locally | |
|
|
| (Please go to the following URL.) |
|
|
|
|
| |
|
|
| On |
|
|
|
| company if its characteristics are equivalent to those of NAGASAWA |
|
|
|
| Electric Co. |
|
|
|
|
|
|
4 | Fuse holder | 1 | Procured locally | |
|
|
| (Please go to the following URL.) |
|
|
|
|
| |
|
|
| On |
|
|
|
| company if its characteristics are equivalent to those of NAGASAWA |
|
|
|
| Electric Co. |
|
|
|
|
|
|
5 | 13 | Use | Procured locally | |
| clamp |
| Material: |
|
|
|
| Harness diameter: Ø5.9 |
|
|
|
| Use equivalence with the above specifications. |
|
|
|
| 11 pieces are used to fix the cord heater to the outdoor unit base plate. |
|
|
|
| One piece is used to fix the power cord to the thermostat fixing plate. |
|
|
|
| One piece is used to fix the power cord to the terminal fixing plate. |
|
|
|
|
|
|
6 | 1 | Use | Procured locally | |
| clamp |
| Material: |
|
|
|
| Harness diameter: Ø9.1 |
|
|
|
| Use equivalence with the above specifications. |
|
|
|
| One piece is used to fix the cord heater to the outdoor unit base plate. |
|
|
|
|
|
|
7 | Screw | 12 | Procured locally | |
|
|
| These screws are used to fix the cord heater to the outdoor unit base |
|
|
|
| plate with |
|
|
|
|
|
|
8 | Screw | 4 | Procured locally | |
|
|
| Two screws are used to fix the thermostat fixing plate to the side cabinet (R). |
|
|
|
| One screw is used to fix the power cord to the thermostat fixing plate. |
|
|
|
| One screw is used to fix the power cord to the terminal fixing plate. |
|
|
|
|
|
|
9 | Screw | 2 | Procured locally | |
|
|
| These screws are used to fix the thermostat to the thermostat fixing |
|
|
|
| plate with the thermostat holder. |
|
|
|
|
|
|
10 | Faston | 2 | #250 They are used for the connecting part to the thermostat. | Procured locally |
|
|
|
|
|
11 | Sleeve for | 2 | UL sleeve for #250 | Procured locally |
| Faston |
|
|
|
|
|
|
|
|
12 | 2 | Use the most appropriate connector with the power cord diameter. | Procured locally | |
| connector |
|
|
|
|
|
|
|
|