13. ADDRESS SETUP

13-1. Address Setup

<Address setup procedure>

When an outdoor unit and an indoor unit are connected, or when an outdoor unit is connected to each indoor unit respectively in the group operation even if multiple refrigerant lines are provided, the automatic address setup completes with power-ON of the outdoor unit. The operation of the remote controller is not accepted while automatic address works. (Approx. 4 to 5 minutes)

Setup of line address of outdoor unit, indoor unit address, and group address

Completion of cabling work

 

 

 

 

 

NO

 

 

 

 

 

 

Do you arbitrarily set the

 

 

 

indoor unit address?

 

 

 

 

 

 

YES

(MANUAL)

 

NO

Is refrigerant line 1 line?

NO

Is group control performed?

YES

Connect one remote controller with one indoor unit (1 : 1) tentatively with communication cable.

YES

(To AUTO address mode)

 

 

Do you change setting after

automatic setting at the first time?

YES

Turn on power of outdoor unit.

Turn on power of outdoor unit.

Turn on power of outdoor unit.

 

 

 

 

(

After completion of address

)

 

 

 

 

 

Set to all indoor units one by one.

 

setup, change is to arbitral

 

 

address/group manually.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setup of automatic

(address finishes within ) 4 to 5 minutes.

END

•When the following addresses are not stored in the neutral memory (IC10) on the indoor P.C. board, a test run operation cannot be performed. (Unfixed data at shipment from factory)

 

Item code

Data at sh ipment

 

Setup data range

 

 

 

 

 

Line

12

0099

0001

(No. 1 unit) to 0030 (No. 30 unit)

address

 

 

 

 

 

 

 

 

 

Indoor unit

13

0099

0001

(No. 1 unit) to 0030 (No. 30 unit)

address

Max. value of indoor units in the identical refrigerant line (Double twin = 4)

 

 

 

 

 

 

 

Group

 

 

0000

: Individual (Indoor units which are not controlled in a group)

14

0099

0001

: Master unit (1 indoor unit in group control)

address

 

 

0002

: Sub unit (Indoor units other than master unit in group control)

 

 

 

 

 

 

 

 

– 115 –

Page 114 Page 116
Page 115
Image 115
Toshiba RAV-SM562UT-E Address Setup, 115, Address setup procedure, Item code Data at sh ipment Setup data range
Page 114 Page 116

RAV-SM562UT-E, RAV-SM802UT-E, RAV-SM1402UT-E, RAV-SM1102UT-E specifications

Toshiba has established itself as a leading name in the field of heating, ventilation, and air conditioning (HVAC) systems. Among their extensive range, the RAV-SM802UT-E, RAV-SM1102UT-E, RAV-SM1402UT-E, and RAV-SM562UT-E stand out for their performance, efficiency, and innovative technology.

The Toshiba RAV-SM802UT-E is designed for medium-sized commercial spaces, providing a cooling capacity of 8 kW. It employs advanced inverter technology, which enables it to adjust the compressor speed based on the load demand. This adaptability leads to a significant decrease in energy consumption, making the unit both eco-friendly and cost-effective. The unit also features a high-efficiency rotary compressor and a wide operating temperature range, ensuring reliable performance even in extreme weather conditions.

Next in line, the RAV-SM1102UT-E offers an impressive 11 kW cooling capacity, making it suitable for larger commercial applications. This model incorporates Toshiba’s cutting-edge Superlink technology, which allows multiple indoor units to be connected to a single outdoor unit, providing flexible installation options. The RAV-SM1102UT-E is also equipped with a sleek and modern design that blends seamlessly with any architecture while ensuring low noise levels during operation, enhancing comfort in the workspace.

The RAV-SM1402UT-E is a powerhouse among the series, boasting a cooling capacity of 14 kW. It is built with an enhanced refrigerant management system that minimizes refrigerant leaks and optimizes thermal efficiency. This model supports smart building management systems, making it an ideal choice for tech-savvy businesses looking to integrate their HVAC systems into a broader energy management framework. Furthermore, it maintains high EU energy efficiency ratings, verifying Toshiba's commitment to environmental sustainability.

Lastly, the RAV-SM562UT-E, with its 5.6 kW cooling capacity, is tailored for smaller commercial environments and residential use. It retains all the core technologies featured in its counterparts, including inverter technology and a high-efficiency compressor, ensuring comfort without excessive energy usage. This model also includes a user-friendly remote control and programmable timer functions, allowing for customized comfort settings and enhanced convenience.

In summary, the Toshiba RAV-SM series represents the pinnacle of HVAC innovation, blending energy efficiency with advanced technology. Each model caters to specific needs, from the compact RAV-SM562UT-E to the robust RAV-SM1402UT-E, ensuring that every commercial and residential space can achieve optimal climate control.
Top Page Image Contents