Chapter 6 X330WAN CLI Commands

ip distribution access-list-owner

Use the ip distribution access-list-ownercommand to set the Policy list owner.

Syntax

ip distribution access-list-owner <policy-list-number> <owner>

Parameters

 

policy-list-number

An integer from 1 to 99.

owner

List owner.

Note: To define a name that includes spaces, enclose the entire name in quotation marks (e.g., “New York”).

Example

X330WAN-2DS1-1(configure)#ip distribution access-list-owner 78 “admin”

ip icmp-errors

Use the ip icmp-errorscommand to set ICMP error messages ON. The no form of this command sets ICMP error messages OFF.

Syntax

[no] ip icmp-errors

ip max-arp-entries

Use the ip max-arp-entriescommand to specify the maximum number of ARP cache entries allowed in the ARP cache. The no form of this command restores to the default value of 4096. This command takes effect only after start-up.

Syntax

[no] ip max-arp-entries <value>

176

Avaya X330WAN User’s Guide

Page 198
Image 198
Avaya X330WAN manual Ip distribution access-list-owner, Ip icmp-errors, Ip max-arp-entries