Chapter 2

Installation

 

 

Note: The cable and two adaptors can be found in the Avaya P330 accessory set, and are clearly marked.

Removing an X330WAN Module from an Avaya P330 Switch

To remove an X330WAN module from a P330 switch:

1Loosen the screws on the front panel of the X330WAN module that secure the module to the P330 switch.

2Grasp the two screw knobs and pull gently but firmly towards yourself. The X330WAN module slides out of the slot.

3Insert another expansion module or the blanking plate into the switch.

16

Avaya X330WAN User’s Guide

Page 38
Image 38
Avaya manual Removing an X330WAN Module from an Avaya P330 Switch