General: Device Commands
Avaya X330WAN User’s Guide 105
show dev log file
Use the show dev log file command to display the encrypted device’s log file.
Syntax
show dev log file
show erase status
Use the show erase status command to view the status of the Erase Startup
Configuration operation.
Syntax
show erase status
show image version
Use the show image version command to display the software version of the
image on both memory banks of the device.
Syntax
show image version
Example
X330WAN-2DS1-1(super)# show image version
Bank Version
---- -------
A 3.9.7
B 3.12.10
Module number: 1
show logout
Use the show logout command to display the CLI logout.
Syntax
show logout
Example
X330WAN-2DS1-1(configure)# show logout
CLI timeout is 15 minutes